How long will the Batteries last in your LED Torch?

When you buy yourself an LED torch light, you need to know how long the battery is going to last.

Why is it so important? Because when you are out on a hike, camping trip, stranded on the side of the road or doing your job – the last thing you want to happen is for your LED torch light’s battery to die out! Then you’ll be stuck out in the dark without any way of seeing anything or signalling for help.

This is the reason why knowing how long your battery in your LED torch light is going to last is so important.

Your LED torch light’s battery can last for as long as 30 minutes to a few hours, and one of the factors that can change your battery’s life span is how high quality they are.

But there are other factors that can influence the run time of your LED torch light:

Brightness – It depends on what LED torch light you own, but it is possible to adjust the brightness setting. Obviously, the highest setting will drain your battery the fastest, so make sure you’re using the right brightness setting to not use up all your battery life.

Temperature – Coldness, humidity and heat can all affect the overall time your LED torch light battery will last. Why? Because these temperatures can cause your torch battery to stop working efficiently.

A wide range of flashlights and flashlight accessories, including batteries, are on offer from Klarus! Contact Klarus Light today! Place your orders today from sales@klaruslight.co.za or call 0607 222 222

How to Prevent Battery Leakage in your Flashlight

You grab your trusted flashlight and turn it on, but all you see is darkness. When you open up the battery compartment, you can immediately see the problem – the batteries have leaked!

Batteries that leak in a flashlight can make a huge mess. If the leak is small and caught right away, it can probably be cleaned up and your flashlight can be saved. Larger leaks can easily ruin your flashlight. This is a problem you can avoid by using these smart tactics.

• Remove the batteries from a flashlight that is rarely used. You can store the batteries along with the light, but don't install them until you are ready to use it.

• Leave the batteries in a flashlight that you have placed in a glove compartment or other place to use in case of an emergency. Remove, inspect, and test the batteries at least every 6 months. If the batteries are run down, immediately replace them. Depleted batteries are more likely to leak.

• Replace depleted batteries in a flashlight with fresh, new ones. Don't mix old and new batteries. Use batteries that are the same type, made by the same manufacturer.

QUICK TIPS

1. Dead batteries should never be left in equipment, their process is nearly complete and the shell is close to breach.
   
2. Live batteries have a date on them for a reason. Chemical reaction occurs even if the battery is live and able to run the equipment. Often with today's LED technology, for example, the batteries will corrode through and start leaking long before they become too weak to run the flashlight.
   
3. If your flashlight is part of a crash kit where you need batteries with the device at all times for emergency use, store them in a separate Ziploc bag and check their dates periodically as well as for leakage.

KLARUS is represented by Klarus South Africa in Africa. The company designs and manufactures some of the most exciting, practical and innovative LED torches on the planet with ultra high lumen output. Order your Klarus flashlight today from sales@klaruslight.co.za or call 071 6136 777

Your Klarus Guarantee

KLARUS guarantees its high lumen output torches against defects in material and workmanship.

At the discretion of KLARUS, any LED Torch, LED Flashlight, or high lumen output police torch products that are found to be defective under normal use within 2 years of the proof of purchase date will repaired or replaced without charge. The warranty does not cover damage caused by accident, unreasonable use or product alteration. 

Obviously, failure to follow the general maintenance directions could result in damage to an illumination tool that may not be covered by the KLARUS warranty. 

We ask that you take reasonable care with your equipment however do obviously understand the stresses and pressures our torches work under - because that's what they're designed to do - SWAT teams around the world rely on Klarus - you should too!

If a torch should prove defective, the product will be repaired or replaced, under the above terms. Please contact us for warranty return instructions

How to look after your Tactical Flashlight properly

Nothing is more frustrating when you really, really need your tactical flashlight and you find out that it’s not working anymore. To avoid being in this situation you have to make a routine where you look after your tactical flashlight properly so it is always ready at a moment’s notice.

Consider using these easy steps before storing your beloved tactical flashlight…

1. Always make sure all dirt, dust, grime and water are wiped off of the outside case of the tactical flashlight. Use a soft cloth and try not to dent or damage the material.

2. Check your tactical flashlight to ensure that all threads on the body of the light and the head are clean and dry.

3. ALWAYS check the battery compartment for signs of leakage or corrosion.

4. Its best to remove and inspect the batteries after each use. Never leave the batteries inside your tactical flashlight when you know you won’t be using it for a long time.

5. Check the overall condition of the flashlight. Are there any cracks or holes? Is the power switch damaged? For a quick fix, use tape!

6. The condition of the glass over the bulb is also important. Make sure to clean and polish it and check for any cracks.

7. Don’t forget to examine the bulb and LED itself. If there are any broken or discoloured wires, replace immediately.

8. Do you have a lanyard on your tactical flashlight? If so, check it for any frays and make sure it is secure. The cord is the only thing holding your flashlight from falling.

9. Rust and corrosion can really damage your tactical flashlight, so coat the outside of your flashlight with silicone grease when you can. 

10. If you don’t use your tactical flashlight on a regular basis, wrap it up in a soft cloth to protect it and store it somewhere safe. 

Even if you don’t often use your flashlight, make it a habit to check it and ensure that it is working properly. Maintaining your torch won’t take a lot of time and effort. You will be thankful you looked after it when you need it in an emergency and it works effectively!

Klarus creates and supplies some of the best LED torch technology on the planet. Visit the Klarus website today and order today!

An LED Flashlight Myth you shouldn’t believe

When you think about a tactical flashlight, the first thing that pops into your mind is a huge, heavy flashlight that is too big and bulky to be used by the average Joe, only police personnel and security guards.

Get this image out of your mind, because this is not what tactical LED flashlights are all about! They are not only designed for specialised purposes – yes, you can own one too!

Everyday technology continues to grow and evolve, as does LED flashlight technology. As torch technology changes, flashlights are now available to anyone in a variety of shapes and sizes, with many different features too.

If you are only going to be using your LED flashlight for simple tasks around the house, like finding your keys under your seat or lighting up the house when the power goes out then a tactical flashlight that fits conveniently in your pocket is just right. Obviously if you’d like a more heavy duty flashlight for hiking trips, etc. then you’ll still be able to own one.

The most impressive advancement in LED flashlight technology is the LED bulbs that can now be found in almost every single tactical flashlight out there. They are not only smaller and lighter, but they’re also more powerful! Usually more power means the battery does not last as long, however LED combine power and extended battery life.

Looking for an affordable tactical flashlight, big or small? Visit the Klarus Light website and have a look through the wide range of torches. From the large XT20 Tactical Torch to the tiny Mi7 – place your order today from sales@klaruslight.co.za or call 071 6136 777.

How your LED Flashlight can save your life!

The darkness can be a dangerous and scary place, especially in an emergency situation when you have to do what you can to fight to survive. The dark can really be your greatest enemy – it’s confusing, it creates panic and fear and it is a great place for awaiting criminals to hide.

Klarus designs and manufacture some of the most exciting, practical and innovative LED torches on the planet with ultra-high Lumen output. Place your orders today!

When it comes to staying safe and feeling safe in the dark, a reliable flashlight is one of the most important tools to keep on hand at all times. Learning how to use your LED flashlight properly can mean the difference between life and death in a number of survival situations.

Here are five ways you can use your flashlight to save your life:

- See trouble coming from a mile away!

Criminals love to work in the cover of darkness, so spoil their plans by getting an LED flashlight and spot a potential attack before it even happens. Shine your LED flashlight when you walk home and you’ll be able to light up the shadows where criminals may be hiding.

- Self-defence

A sturdy, durable tactical LED flashlight can also be used as a weapon against an attacker. Instead of holding it the way people usually do, with your fingers pointing towards the bulb, invert your fist and grip the flashlight with the bulb pointing away from your thumb. Holding your LED flashlight this way will allow you to use to jab an attacker or swing it like a baton!

- Signal for help

Use your LED flashlight as an emergency signal if you are ever lost, stranded or in trouble. Many hikers who have been lost have used their LED flashlights as signals so search and rescue teams can find them. Always remember that three fast pulses of light can be used to signal for help.

- Protect against an animal attack

There might be a time in your life when you are out camping or hiking and you come across a dangerous, wild animal. Should this happen at night, a bright blast of light in an animals eye with your LED flashlight will disorientate the creature and hopefully scare them enough to send them running.

- Escape a potential death trap

In the event that there is an earthquake, tsunami, fire or any other natural disaster you may be trapped in a dark building that you need to quickly escape from. Having a handy LED flashlight on hand will hopefully keep you calm and help you get out without too many injuries.

Survival is all about resourcefulness and getting the most out of every tool available to you. An LED flashlight is one of the most versatile tools available!

How to look after your Flashlight properly

When you desperately need your torch and you pull it out to discover it’s not working anymore, nothing is more frustrating! To avoid this dilemma you have to create a routine where you maintain and store your flashlight so it’s always ready at a moment’s notice.

 Consider using these easy steps before storing your beloved flashlight…

1. Always make sure all bits of dirt, dust, grime and water are wiped off of the outside case of the torch. Use a soft cloth and try not to dent or damage the material.

2. Ensure the threads on the body and the head are clean and dry and without any snags.

3. ALWAYS check the battery compartment for signs of leakage or corrosion.

4. Its best to remove and inspect the batteries after each use. Never leave the batteries inside your torch when you know you won’t be using it for a long time.

5. Check the overall condition of the flashlight. Are there any cracks or holes? Is the power switch damaged? For a quick fix, use tape!

6. The condition of the glass over the bulb is also important. Make sure to clean and polish it and check for any cracks.

7. Don’t forget to examine the bulb and LED itself. If there are any broken or discoloured wires, replace immediately.

8. Do you have a lanyard on your flashlight? If so, check it for any frays and make sure it is secure. The cord is the only thing holding your flashlight from falling.

9. Protect your torch against rust and corrosion. Lightly coat all the grooves and ridges with silicone grease when possible.

10. If you rarely use your flashlight, wrap it in soft protective cloth when you store it.

Even if you don’t often use your flashlight, make it a habit to check it and ensure that it is working properly. Maintaining your torch won’t take a lot of time and effort. You will be thankful you looked after it when you need it in an emergency and it works effectively!

Klarus creates and supplies some of the best LED torch technology on the planet. Visit the Klarus website today and order today!

Signalling for Help with your Flashlight

No matter how much of a professional you are, the wilderness is unpredictable and it can turn your simple hiking trip into a fight to survive.

Injuries, weather changes, wild animals or simply getting lost can end in you needing to summon help immediately.

A flashlight could mean the difference between life and death, so you need to learn how to use your torch to signal for help when times get tough.

STEP ONE

When you are trying to signal for help, it is vital that your torch is powerful enough to be seen from a distance away, on the ground and in the air. This is why it is better to purchase a powerful LED tactical torch than a regular cheap torch that will only provide a weak beam of light. LED flashlight’s can be seen from far distances – visit the Klarus website and take a look at the range of LED tactical torches. The Klarus G20 and the Klarus XT12 GT are recommended choices.

If your backpack is spacious, it is also a great idea to bring along a LED lantern. Why? Because they are bright and offer longer battery life as well as emergency strobe settings that’ll help rescuers find you easily.

Yes, it is important not to wander off as you may get more lost, however it is a smart idea to try and find a high point or a large clearing where you can send out your signal to heighten your chances of being spotted. BUT only do this if you are not injured and you can see the location from where you are standing – never wander off without knowing where you are going!

STEP TWO

It is tempting to leave your flashlight on in case someone happens to see it, however it is important to make sure your batteries last a long time – you don’t know how long you’re going to be searching for help! Use your torch as sparingly as you can to preserve battery life, even if your torch has long-lasting LED technology.

Signal for help in brief blasts of light by turning your flashlight on and off instead. Here’s how:

  n  Three flashes in a row signal that you are in need of help.

  n  The Morse code signal for help is: three short flashes, three long flashes and three more short flashes.

If there is a helicopter in the distance your torch can be used to signal it for help, so always keep your eyes and ears open for any lights, sounds and other signs that people might be nearby. This is why it is so important to preserve your batteries, so you can signal over help when necessary.

STEP THREE

If you manage to signal help you may be tempted to move from your position and head towards your rescuers, however this is the worst mistake you can make! You can signal for help at your current position, so the last thing you want to do is move from that position and not be there when people arrive to help you.

Rather keep calm and wait for them to come to you instead, while signalling to help them find where you are located.

Planning on taking a hiking trip? Always remember your trusty flashlight is not just for lighting up the dark, but it can also save your life in times of need!

Six Things you can do before changing your LED

LEDs are amazing, they can last almost forever. Well, not forever, but they can last for up to 50 000 hours, now that’s a long time! 50 000 hours is approximately 5.7 years, so what exactly could you do in that amount of time?

What could you accomplish before the LED in your flashlight died? Here are six cool examples:

Master Five Disciplines
It takes a lot of practice and effort to master a specific discipline or subject. It takes about 10 000 hours of deliberate study and practice to master any subject, so in the time it takes your LED to burn out, you can master five disciplines. Time to get to work!

Get your Undergraduate Degree – And Even Start your Masters
Broaden your mind by pursuing a liberal arts degree. Despite all the hype, most undergraduate degrees take about five years to complete. So, in the 5.7 years it takes your LED to stop working, you can get your degree and even get started on your masters.

Go to Mars and Come Back and Go Back and…
With the current technology, it takes seven months to reach Mars. That means it’ll take 14 months to make the round trip. So, you can make the trip four times, and if you time it just right you can even sneak in another trip before your LED light goes out.

Sail Around the World
In a personal cruising style sailboat it will take about two years to sail around the globe! You could definitely go around the world twice and get close to a third time by the time you need to get to land and buy a new LED.

Walk the Entire Great Wall of China
How about walking the world’s longest man-made structure? Well, to walk the Great Wall of China it’ll take about 18 months. If you walked at a fast pace, you could go back and forth twice before you had to buy another LED to light your way at night.

Walk Around the World
Okay, this is a pretty big one. It took the first man to walk around the globe just over four years. Why don’t you take your time and just do it once in 5.7 years. There are some amazing places to see before your LED dies.

So, these are 6 examples of things to accomplish before your LED runs out. What would you do before your LED light died?

Klarus makes the best innovative and practical  LED torches on the planet. For the best LED torch technology - contact Klarus!

Guide to basic LED flashlight repair

When your light decides not to work, it can usually be fixed very easily. Here is a guide to go through some basic troubleshooting steps that may hopefully help your light shine again!

for a wide variety of durable and affordable flashlights, visit Klarus Light's website. Klarus is one of the most well-known torch brands in the world and are guaranteed to be high quality.

It is possible that these solutions may not fix your problem, if so, and then it would be best to have your flashlight repaired under warranty.

PROBLEM: Your flashlight is shining dimly

SOLUTION: Check you batteries. When you’re diagnosing a problem with anything, it’s always a good idea to start off with the simplest possible solution. If your light is shining dimly, the issue is probably weak batteries. Replace your batteries with a fresh set and you should be good to go.

PROBLEM: Your flashlight is flickering

SOLUTION: Dirt or grime on contacts. A common solution to flashlight flickering can be dirt or grime on the internal contacts of the light. Unscrew the head and tail cap off your flashlight and clean the contacts where the body touches the head or tail cap. To do this, use a damp paper towel.

PROBLEM: Your flashlight is not turning on

SOLUTION: Check your batteries, dirt / grime on contacts, or improperly assembled flashlight. Have you disassembled your flashlight and then found that it does not work upon reassembly? It is possible that you disassembled it improperly. 

Disassemble your flashlight again. This time make sure all O-rings are properly aligned and any pocket clips or accessories are correctly installed. The head and tail cap of the flashlight should fit snugly. If the head or tail cap are not tightened down all the way, make sure that any O-rings or other possible obstructions are not keeping you from tightening them down.

Hopefully these simple solutions helped with your flashlight problems. Although they are not guaranteed to fix your light, these steps are where you should start your flashlight troubleshooting.

How does an LED flashlight work?

An LED flashlight is a portable, handheld light source, and they are known to be the best lighting technology. Klarus Light has a top range of affordable LED flashlights to choose from. But, how do LEDs work?

Looking at basic lighting technology, you will usually see incandescent bulbs, which are your average light bulbs. They work by heating up a tiny metal filament that glows, which can waste a lot of energy because of all the heat that is produced. This means that the run time is usually short and the light is not very bright.

When LED flashlights are turned on, the filament casts a light that reflects away from the bulb, and the reflectors can focus and even magnify the light to project a stable beam. LEDs are usually preferred because they have special features that are not found in your average flashlight. Some of the better features are that they have a stable, crisp light source that is much brighter than a standard bulb.

LED flashlights are perfect for camping or hunting trips, unlike a normal flashlight; they can send concentrated beams of light that can reach 1.5km away. They are also durable under tough conditions. A standard flashlight may not be able to last very long in the extreme outdoors – the bulbs are easily broken and are useless if shattered. Most LED flashlights are made out of tough, durable material that can stand a few drops and throws.

Most flashlights will work for three to five hours depending on the life span of the batteries. LED flashlight, however, last much longer! You can get 100 hours of light before needing to replace the batteries. In the end LED flashlights save you money and make changing batteries a thing of the past.