How to Repair your Flashlight

When your light is no longer working, it can usually be fixed very easily...

However, it is possible that these simple solutions may not fix your problem. If it is an issue with the circuit board of the flashlight, then it would be best to have your light repaired under warranty.

Problem: Your Flashlight Is Shining Dimly

Solution: 

Check your batteries - When you're diagnosing a problem with anything, it's always a good idea to start with the simplest possible solution. If your light is shining dimly, the issue is probably weak batteries. Replace your batteries with a fresh set and you should be good to go!

Problem: Your Flashlight Is Flickering

Solution:

Dirt or grime on contacts - A common solution to flashlight flickering can be dirt or grime on the internal contacts of the light. Unscrew the head and tailcap (if your flashlight has a tailcap) off of the light and clean the contacts where the body touches the head or tailcap. To do this, you can use a damp paper towel. Wipe off any dirt and grime, and then assemble the flashlight again.

If this does not help, then there may be an issue with the circuitry of your flashlight, which should fall under a warranty repair. Most reputable manufacturers will either repair or replace your flashlight at this point.

Problem: Your Flashlight Is Not Turning On

Solution:

Check your batteries (see above)

Dirt or grime on contacts (see above)

Improperly assembled flashlight - Have you disassembled your flashlight and then found that it does not work upon reassembly? It is possible that you disassembled it improperly.

Disassemble your flashlight again. This time, upon reassembly, make sure that all o-rings are properly aligned and any pockets clips or accessories are correctly installed. The head and tailcap of the flashlight should fit snugly. If the head or tailcap are not tightening down all the way, make sure that any o-rings or other possible obstructions are not keeping you from tightening them down.

Leaked Battery - It is also possible that a battery might have leaked battery acid in your flashlight. If your flashlight takes alkaline batteries, this is definitely a possibility.

Disassemble your flashlight and remove your batteries. If there is any sign of corrosion, dispose of those batteries and no longer use them. Look into the body of the light and look for white or rust-coloured discoloration. If you see some, use a wire brush and a slightly acidic solvent to try and scrape any corrosion away.

It may also be necessary to take a file and remove any corroded metal at the base or head of the flashlight body (the area where the head and tailcap make contact with the body). There needs to be bare metal visible on both sides of the body for the flashlight to complete an electrical circuit to work properly.

After cleaning and removing the corrosion from the light, assemble the flashlight and test for functionality. If this does not help, you may try contacting the manufacturer. Although not guaranteed, your flashlight manufacturer may be willing to either replace or fix the flashlight under warranty.

Although not guaranteed to fix your light, always start with these steps to begin your flashlight troubleshooting.

Klarus Light produces and designs some of the best flashlights in the world. For a broad range of flashlights and accessories, contact Klarus today, or visit the website!

Guide to basic LED flashlight repair

When your light decides not to work, it can usually be fixed very easily. Here is a guide to go through some basic troubleshooting steps that may hopefully help your light shine again!

for a wide variety of durable and affordable flashlights, visit Klarus Light's website. Klarus is one of the most well-known torch brands in the world and are guaranteed to be high quality.

It is possible that these solutions may not fix your problem, if so, and then it would be best to have your flashlight repaired under warranty.

PROBLEM: Your flashlight is shining dimly

SOLUTION: Check you batteries. When you’re diagnosing a problem with anything, it’s always a good idea to start off with the simplest possible solution. If your light is shining dimly, the issue is probably weak batteries. Replace your batteries with a fresh set and you should be good to go.

PROBLEM: Your flashlight is flickering

SOLUTION: Dirt or grime on contacts. A common solution to flashlight flickering can be dirt or grime on the internal contacts of the light. Unscrew the head and tail cap off your flashlight and clean the contacts where the body touches the head or tail cap. To do this, use a damp paper towel.

PROBLEM: Your flashlight is not turning on

SOLUTION: Check your batteries, dirt / grime on contacts, or improperly assembled flashlight. Have you disassembled your flashlight and then found that it does not work upon reassembly? It is possible that you disassembled it improperly. 

Disassemble your flashlight again. This time make sure all O-rings are properly aligned and any pocket clips or accessories are correctly installed. The head and tail cap of the flashlight should fit snugly. If the head or tail cap are not tightened down all the way, make sure that any O-rings or other possible obstructions are not keeping you from tightening them down.

Hopefully these simple solutions helped with your flashlight problems. Although they are not guaranteed to fix your light, these steps are where you should start your flashlight troubleshooting.