Review - Klarus XT30R

Every so often I’m asked to evaluate a working tool that just jumps out from the rest and says “Take my money!”

The Klarus XT30R definitively fits within this category. When I received this well packaged torch, I immediately dove into the packaging to see what there was to fiddle with. Out came a slim, comfortable and well balanced torch that’s apparently suitable for hunting and tactical applications. Personally – I’ve found it to have many more applications than that.

Now it’s no secret I’m a Klarus fan through and through. The packaging is always attractive and well thought out. The contents of the goodie box is logical and practical at the same time. This was no exception. The first thing I noted was the magnetic charging port. With a lifestyle that means I often have to literally grab equipment and run, getting stuck to charging points isn’t one of my favourite passtimes. Much like the legendary Mac chargers, you push the magnetic contact to the torch and that’s it. No need to take batteries in and out at all.

I was patient and gave the batteries a full charge before putting this beast to the test. First off was the garden test. I like to wait till well after dark, then take a wander around the house and see what the usability would be at night in a home environment. To say that this beast and it’s 1800 lumen abilities lit up the garden is an understatement. Bearing in mind that my property is a good 600sq meters it literally lit up the entire side of the house. Dark little corners behind shrubs, the works. I even went as far as to challenge my son to hide in the garden and see if I could spot him – no problem there at all.

The box claimed to deliver 800m plus illumination – being the doubting Thomas that I am, I needed to see this for myself. I set off to the beachfront to get a nice cast of the beam straight down the beach which was in total darkness. Not only was I impressed by the very obvious 800m reach – I was amazed by the depth of illumination and the overall comfort. 

For a torch with a relatively large bulberous shape I was expecting a little clumsiness. Not so, it was well balanced, gripped well and worked exactly as promised. The programmable buttons are typically Klarus quality, 50%, 20%, 10% by my estimation in terms of power output.

I headed home quite impressed with the overall functionality and promptly left it on overnight in the study to drain the battery. Firstly the study was lit up like a beacon, secondly the battery was still holding 6 hours later.

This is definitively my new favourite torch for tactical applications, home use, camping and all manner of applications. A solidly built robust design that delivers on every promise it makes one by one.

Klarus creates some of the most sought after torches on the planet - Visit the Klarus Light website for a range of innovative tactical torches and accessories! 

Review – XTQ1

Like the RS11, the XTQ1 comes in a store-shelf display packaging. (Check out Klarus Light’s Winter Special for the XTQ1 – 50% discount due to incorrect packaging for the flashlight!)

The hard anodizing is a matt dark brownish gray and consistent throughout with no chips or blemishes. Lettering is not very bright white, but legible against the background.

You can take the light apart without any tools and get three parts. 

The XTQ1 has a stainless steel crenulated bezel ring, which is removable, allowing light to shine through when left placed head down. Like the RS11, the bezel ring is not directly touch the o-ring & lens in the head. There is an inner ring similar to bracket between the bezel ring and lens. This structure seems more shock-resistance.

There is a raised contact spring in the head of the light, so flat-top 18650 batteries should work fine in the light. The light has reverse polarity protection to protect from incorrect battery installation (i.e., the electronics of the XTQ1 has in-built reverse polarity protection).

The light uses toughened ultra-clear lens. The purple hue is reflected on it. The aluminium reflector has a light orange peel pattern. Surface finish on the reflector is nice from visual inspection, and well-centred LED sits at the bottom of the reflector cup.

The battery tube has no knurling. But with all the ridge detail and extra elements around the head and body, overall grip is good. The stainless steel clip-on pocket clip seems to hold on fairly well. It is head-facing, and not reversible. The bundled grip ring is a metal. It can spin even when the tail cap is fully tightened, but it's not inconvenient using the light.

The wall thickness of the body is about 1.9mm, and the light seems reasonably solid.

The screw threads are trapezoidal-cut of good quality. Both male and female threads in the head and tail part are well machined, with being anodized which allows the light to be locked-out when the head or tail cap is slightly loosened. Threads on the both ends of the body mate well with no issues of cross-threading or grinding.

At the tail base, you can see a slightly sunken surface that is very flat. The distinctive aspect of the light is a metal flat switch with no audible click when pressing it. This switch gives you a large contact area and allows the light tail stand perfectly. The switching travel is shorter than average, with average resistance.

There is a brief pre-flash when making initial contact of the tail cap with the battery, and a second pre-flash when fully tightened. There is also a brief pre-flash when the tail cap is fully loosened. There is no pre-flash when activating the light in any mode.

Overall Impressions

• Build quality is very high
• No audible click (i.e., quiet) when pressing the tail switch
• Anti-roll indentations on the body
• The light can tail stand stably
• Electrical reverse polarity protection function
• Standby current drain, but quite negligible
• No mode memory (i.e., always comes on in High)
• True flat-top batteries work fine
• Timed step-down feature on High
• Output-runtime efficiency seems fine
• True Moonlight mode is not available
• Brief pre-flash when making initial contact of the tailcap with the battery and when fully tightened
• The beam tint is typical cool white
• Throw is reasonable for the class

Review - Klarus XT2C

The Klarus XT2C flashlight itself feels high quality, with no sharp edges and good balance and utility. The interface is also much more intuitive than a lot of the tactical flashlights and it seems like this feature puts the XT2C above a lot of others. Like many other high end flashlights, this one is designed for an 18650 li-ion battery or two CR123 camera batteries. You may want to order your flashlight with the batteries and charger from the Klarus Light website; there you’ll find a wide range of durable, affordable and innovative tactical torches.

The switch interface on this flashlight is spot on for the intended application. Mode-less operation means that actions are always the same. A light press on the main button pulls the flashlight up on high, whereas a harder press clicks it down to stay on. That by itself isn’t fantastic; it’s how the flashlight incorporates the strobe functionality that is really usable.

Strobing flashlights are supposed to confuse and disorient targets, but incorporating another mode into a flashlight in an intuitive way is difficult. Most flashlight interfaces are somewhat confusing to use. However, with the Klarus XT2C you can press the “Mode” button to get straight to a momentary full brightness strobe!

With all the buttons on the back and a compact body, this flashlight would be a great candidate for mounting on a pistol or rifle.

The light beam on the XT2C could be described as “floody” and very wide. The reflector is fairly small and uses an “orange peel” style texture rather than a smooth one. When you point it at something, it floods the whole area with light instead of focusing tightly where you aim it. This is perfect for the intended use as a weapon mounted flashlight.

You probably wouldn’t drop your flashlight into a glass of water, but it’s nice knowing that it can handle some water without any problem at all. The flashlight is spec’d at fully waterproof to 2 metres because the o-rings on both sides stop the water from getting past. This light is also impact resistant to a certain height.

All in all, the Klarus XT2C is great value for money. The Cree XM-L is a great LED and really pumps out the lumens in this small flashlight.

Review – Klarus AR10

Flashlights are important, aren’t they? Small and large, piercing the darkness like a searchlight or dimly preserving our tactical night vision, we love them all. The AR10 rechargeable flashlight is a pretty straightforward torch, at first glance, but there are hidden superpowers within.

Would you like to purchase the AR10 flashlight? Take a look on Klarus Light's website and you'll find a wide range of durable, affordable flashlights. 

The AR10 is a single-LED, single-focus flashlight, powered by a single 2600mAh Lithium 18650 cell. Illumination comes from a CREE XM-L2 U2 LED. The light meets IPX8 spec, which means it is waterproof to 2 meters, as well as being impact resistant from 1 metre. The battery is easily changeable and reverse-protected (You can’t put it in wrong!), accessed through a screw-on end cap, sealed with a single O-ring below the threads. There is a single push-button switch that activates both the on/off function as well as the four levels of light the LED can emit (Turbo, High, Medium, and Low). These are 1080, 450, 150, and 10 lumens, respectively.

When it’s first turned on, the LED shines at the intensity of the previous use. If a different intensity is desired, the user only has to click a few more times and the unit cycles through them all. Turning the device off is as simple as holding down the switch for a few seconds.

Two more modes are available as well. When the light is on in any mode, a triple press will activate strobe mode at Turbo intensity. Another triple press moves it to SOS mode, which is at Medium intensity. There is also a locking feature, which prevents the unit from accidentally being activated by children or from within a pack or suitcase.

When the light is first turned on, an indicator glows slightly in the centre of the switch. This is the battery power meter. (Centre button LED power indicator is above.) It will glow green for 70-100% charge, orange for 30-70%, and red for less than 30%. If it gets down to 10% or less, it will flash red.

The unit itself is about 14cm long. The flat end cap is magnetized, so that it will stay attached in an upright or vertical position, or hang from a metal shelf or rack. This is where the AR10’s hidden superpower comes in – you can rotate the head as much as 90°! There is a 45° joint that allows about the top inch to swivel down into a right angle to the main body. The light can stay on throughout the action, and will stay at whatever angle you place it at. With the magnetic tail piece, you can direct a steady beam of light in virtually any direction.

Below the end cap joint is a nicely knurled section. At that point, there is a groove around the entire torch with a chromed metal clip attached, which can spin around fully. The clip is very tight, and may be removable. The next three inches moving up to the inset tempered glass lens is mostly smooth, with a few deep designs machined in. Opposite the rubberized push button switch is a gasket-covered port for a microUSB charging cable.

The torch can be recharged without removing the battery. A weather-protected miniUSB port opposite the power button allows you to connect to any powered USB port to grab power and refresh the battery.

At 149 grams with a battery installed it’s not going to weigh anyone’s pack or belt too much. The whole flashlight has a nice heft to it, and you don’t have to worry about damaging it if you drop it. 

The AR10 is rated at a high output of 1080 lumens, with a rated runtime of “as long as” 220 hours on a full charge. While Lithium 18650 cells are not everywhere or particularly cheap, they are dependable and long-lasting and can take repeat charges for years. Since they can recharge in place, you may never find you need to replace it, but it’s nice to know it’s pretty standard if you do.